Standard tools TYPE ”A“
Material
C45, C50, 41Cr4 or 42CrMo4
Working edge hardened
53±2HRC
Standard lengths
835 and 415 mm
Segment length
as shown on drawing
Sectionalized tool TYPE “A”
![](/wp-content/uploads/2018/04/narz_seg_a.jpg)
![](/wp-content/uploads/2018/04/narz_seg_a.jpg)
Punch mounting edge
Die mounting edge
Standard tools TYPE ”T“
Material
C45, 42CrMo4 or 1.2312
Thermal enhancement to*
30±2HRC (950 – 1100MPa)
Working edge hardened
53±2HRC (1500 – 1600MPa)
Length
835, 500 and 550 mm segmented
* applies to 1.2312
Sectionalized tool TYPE “T”
![](/wp-content/uploads/2018/04/narz_seg_t.jpg)
![](/wp-content/uploads/2018/04/narz_seg_t.jpg)
Punch mounting edge
Die mounting edge
Standard tools TYPE ”W“
Material
C45, 42CrMo4 or 1.2312
Thermal enhancement to*
30±2HRC (950 – 1100MPa)
Working edge hardened
55±2HRC (1500 – 1600MPa)
Length
TYPE “W” 515, 550 mm segmented
* applies to 1.2312
Sectionalized tool TYPE “W”
![](/wp-content/uploads/2018/04/narz_seg_w.jpg)
![](/wp-content/uploads/2018/04/narz_seg_w.jpg)
Punch mounting edge
Die mounting edge
Standard tools TYPE ”B“
Material
C45, 42CrMo4 or 1.2312
Thermal enhancement to*
30±2HRC (950 – 1100MPa)
Working edge hardened
55±2HRC (1500 – 1600MPa)
Length
515, 550 mm segmented
* applies to 1.2312
Sectionalized tool TYPE “B”
![](/wp-content/uploads/2020/04/narz_seg_b.jpg)
![](/wp-content/uploads/2020/04/narz_seg_b.jpg)
Punch mounting edge
Die mounting edge
Standard tools TYPE ”L“
Material
C45, 42CrMo4 or 1.2312
Thermal enhancement to*
30±2HRC (950 – 1100MPa)
Working edge hardened
53±2HRC (1500 – 1600MPa)
Length
508 and 550 mm segmented
* applies to 1.2312
Sectionalized tool TYPE “L”
![](/wp-content/uploads/2018/04/narz_seg_l.jpg)
![](/wp-content/uploads/2018/04/narz_seg_l.jpg)
Punches type “L” have five different clampings
Die mounting edge
Tool ordering code
Punches i.e 2010/88/R0.8/835
2010/88/R0.8/835 – Catalogue number
2010/88/R0.8/835 – Angle α=30°, 35°, 60°, 75°, 80°, 88°, 90°
2010/88/R0.8/835 – Working edge type – thus “F” or “R”and size
2010/88/R0.8/835 – Length of tool – thus 835 mm, 415 mm, 835 mm sectionalized
Dies i.e 6112/35/835
6112/35/835 – Catalogue number
6112/35/835 – Angle α=30°, 35°, 60°, 85°, 88°, 90°
6112/35/835 – Length of tool – thus 835 mm, 415 mm, 835 mm sectionalized
Additional information
![]() |
in stock |
![]() |
fast delivery possible |
![]() |
42CrMo4 steel as standard |